Original
By certification 
Introduction：
The High Speed Plastic Roller Shutter Door uses a powerful 0.75-3KW; a dedicated drive motor with a voltage of 220V / 380V, with fast door opening and closing speed and low noise. The inverter can adjust the required upstream and downstream speeds according to actual needs. .
The control system of the High Speed Plastic Roller Shutter Door adopts an IP65 control box and is compatible with commonly used protection equipment; the whole adopts PLC digital programming to realize the safe passage of personnel, vehicles and objects, and the parking manual joystick is convenient to open or close.
|
|
Specification ：
Anti-wind rods: |
Aluminium steel tubes |
Photoelectric/infrared safety protection: |
Double sides photo-electric safety device protection or top radar reaction.door stop going down to go upside. |
Radar or loop motion sensor: |
To help opening and closing Remote: Telecontrol |
Safety bottom : |
To protect objects at the bottom when door going down |
Switch mode: |
Manual buttons Triplex or touchless motions sensor |
Speed |
0.5-2.5m/s |
Max.size |
Width 15m x height 15m |
Motor warranty： |
2years |
HS special motor: |
0.75KW/1.5KW/2.2KW/220V/50HZ |
Difference in Pressure : |
50 Mpa. |
Side rail material: |
galvanized or 304 S/S steel. |
Advantage
1. Factory direct sales
2. Easy to install, complete after-sales installation video and manual guidance.
3. Durable: 20 years warranty
4. European standard and OEM service
5. Strict quality management system
http://www.v-signindustrial.com/
